Deco-Coat Products

Home

Doming Products

Frequently Asked Questions

Glossary of Terms

Doming Equipment

Order Online

Request Sample

Customer Survey

 


Polurethane Doming Series


Epoxy Doming Resins | UV Curable Resins | Urethane Doming Resins

 
 

Home | Doming Products | FAQs | Glossary of Terms | Doming Equipment
Order Online | Product Selection Form | Request Sample | Contact Us | Customer Survey


The Deco-Coat Urethane Doming Series are two component, low viscosity polyurethane doming resins. These decorative resin systems are designed for continuous outdoor exposure. They remain crystal clear and resist yellowing.

All three products form a durable 3D lens effect on labels, decals, badges, name plates, lapel pins, automotive hood ornaments, etc...  These systems cure at room temperature and have a convenient 1:1 mix ratio.
 

FEATURES:

Low Viscosity Available in Dual Barrel Cartridges
Formulated for Outdoor One to One Ratio
Crystal Clear Contains No Solvents


TYPICAL SPECIFICATIONS:

Specification DC-2606 DC-2607 DC-2605
Color Crystal Clear Crystal Clear Crystal Clear
Viscosity @ 25°C, CPS, (A/B) 600/350 600/350 600/35
Hardness, shore 80D 50D 50A
Mix Ratio, By Volume 1:1 1:1 1:1
Gel Time, 25°C 100 Grams 7-10 Minutes 7-10 Minutes 7-10 Minutes
Cure Time, 25°C 24-36 Hours 24-36 Hours 24-36
Hours
Weathering Resistance, ASTM G53 Pass Pass Pass
Specific gravity, 25°C (A/B) 1.0/1.05 1.0/1.05 1.0/1.05

 
WEATHER RESISTANT TEST DATA:

The DC-2605, DC-2606 and DC-2607 was tested according to ASTM G53 for accelerated outdoor weathering. A QUV weatherometer in an independent lab was used. All three formulations surpassed 1,000 hours.  There was no crazing, cracking, blistering, or flaking. Three to five year outdoor life is expected with only the slightest of visible change expected. Recommended for outdoor use.
 

NOTES:

Polyurethane resins can be contaminated by humidity. These materials are hygroscopic and will form tiny air bubbles during curing if exposed to water.

Doming should therefore take place in a dehumidified room. Avoid using wooden sticks or other tools that may contain moisture.

The substrates to be domed should also be free of moisture and non-porous. Avoid using hygroscopic inks and in particular those containing glycerine. 

Please review our Storage, Hazards, and Handling of Urethane Bulletin. Always read Material Safety Data Sheets before using this or any other chemicals.


AVAILABILITY:

1. Available in gallons, 5 gallon pails, and 55 gallon drums


IMPORTANT:
 
The information in this brochure is based on data obtained by our own research and is considered accurate. However, no warranty is expressed or implied regarding the accuracy of these data, the results to be obtained from the use thereof, or that such use will not infringe any patent. This information is furnished upon the condition that the person receiving it shall make his own tests to determine the suitability thereof for his particular purpose.

Epoxy Doming Resins | UV Curable Resins | Urethane Doming Resins
 
 

Home | Doming Products | FAQs | Glossary of Terms | Doming Equipment
Order Online | Product Selection Form | Request Sample | Contact Us | Customer Survey


Copyright © 2011 Epoxies Etc...
Deco-Coat Product line
21 Starline Way, Cranston, RI  02921
"The Deco-Coat Advantage is Crystal Clear!"
1-888-EPOXIES
Directions to Epoxies Etc...